Lawnba EXGAIN E1600 Robotic lawn mower is one of the largest robot mowers in this range. Capable of mowing up to 2600 m2 of lawn, working up to 3 hours at a time. The lawn will be leveled in few days, you will never have to touch the push / ride on mower ever again.
Lift sensor:? There are lift sensors located between the top and middle- cover. If the mower is lifted from ground, it will stops? working within 1 second.
Tilt sensor There are tilt sensors installed on the mower too, when mower is tilted over 30 degrees in any direction, it stops working within 2 seconds
Bump sensors: The whole top cover is movable. Both front and back of mower equipped with bump sensors that will activate when the mower strikes solid, fixed object when that object is at least 6cm in vertical height from the supporting surface of the mower. When the bump sensor is activated, the mower will back up and change directions.
Rain sensors There are two rain sensors located on the mower. The mower will go back to the charging station when it’s raining. Automatically Turn on: the mower will go back home if it is raining. Turn off: the mower will go on mowing when it is raining.
Wifi: The IOS user can search ?EGROBOT? in the Apple Store to download the application.
The Android user search ?EGROBOT? in the Google Play to download the application.
Mowing schedule Set up one week (From Monday to Sunday, once for schedule from control panel. This each day) cutting schedule from control panel. This function should be used together with AREA function.
Anti-theft function Mower has password protection option to guard against theft. What’s more, the mower can not be turned on without a charging station.
Cutting width: 28cm
Easy cutting height adjustments 2.5cm-5.5cm selected with one dial.
Auto recharge system When the mower senses a low battery situation, it will shut off the cutting motor and search for the virtual wire. Once found it will follow the virtual wire to the charging station for recharge automatically. Once charging is complete, the mower will back up a few centimeters ready to go again in stand by mode.
Emergency stop switch There is an emergency button located on the top of the mower and in red color. Press the to switch on / off.
Two cutting modes There are two cutting modes of the mower, go straight and go circle (high efficiency). While in Auto mode, mower selects cutting mode intelligently. It goes straight if the grass is sparse or it has be cut off, and it goes circle if the grass is dense or long. In manual mode, the mower will go where you direct it.
Pressure sensors The pressure sensors located on the top cover. If a child or something rides or sits on the mower, it stops working within 1 second.
Virtual Wire: The robot lawn mower can’t be operated without a virtual wire. (we suggest to use 100m-600m of virtual wire) The mower will follow virtual wire to charging station, the virtual wire acts as a virtual fence. It will get on the virtual wire until it meets charging sheets, then it gets off from virtual wire and starts cutting inside.
Mower stops working if virtual wire is cut off or charging station is powered off.? If virtual wire is cut or broken, or the charging station looses power, the mower will stop working within 3 seconds
Four steps to safely start the mower There are four necessary steps to start the mower:
1: Connect charging station with power supply by charger and make sure the recharging light is in green color.
2:? Connect virtual wire to charging station.
3:? Turn on the power button and press the emergency button.
4:? Input password (if required) and select mode.
Overload protect The brushless cutting motor and each of the two running motors are monitored continuously during operation for any situation that may cause these motors to over-load In the event this is detected, the mower stops operating.
Waterproof Waterproof design, there is an inner cover under top inside parts from humidity. The waterproof class is IP54.
Gyroscope: The mower has gyroscope to keep it going straight on inclines.
Subarea setting: You can select Subareas for the mower to cut. This works well for large lawn. (See manual Section 5.12). This function should be used together with schedule.
Different languages selection.
Range: There are four range options, user can choose the distance when robot hit virtual wire according the condition of different lawns.